|
MOTOR HOME TOWING ELECTRICAL PRODUCTS
| DIODE SYSTEM FOR TOWED VEHICLES $25.99 |
VIEW INSTRUCTIONS |
Allows you to connect the lights on the rear of the
vehicle being
towed so that it has park, brake and indicator lights functioning.
Includes:
4 diode blocks,
insulated terminals,
20 ft. harness with 4 pin flat.
|
| |
|
| TAILLIGHT ISOLATING SYSTEM $45.99 |
 |
Allows Motorhome to power the lights on Towed Vehicle
without power feedback. Provides park, brake and indicator lights on the
rear of the towed vehicle.
Includes: 2 integrated diode blocks,
insulated terminals, harness.
|
| |
|
| TAILLIGHT UNIVERSAL ISOLATING WIRING SYSTEM |
 |
Allows Motorhome to power the lights on Towed Vehicle
without power feedback. Provides park, brake and indicator lights on the
rear of the towed vehicle.
Includes high powered diodes, 30ft. 4 color wire, 3 ft. split wire loom, 6
ft. extension, insulated terminals and other installation accessories.
4 Integrated Diode Isolating System
$79.99
6 Integrated Diode Isolating System $103.99
8 Integrated Diode Isolating System $129.99
|
| |
|
| TAILLIGHT WIRING KIT with BULBS - Connects to 4 Pin
Flat $59.99 |
 |
Self-contained wiring system that bypasses your towed car’s turn
signals, running lights and brake lights with a set of independent plugs
and sockets mounted inside the taillight's housing. Wiring is routed
underneath the car, to a socket mounted to the grille or fascia. Since
the towed vehicle’s electrical system is bypassed, this kit eliminates
the concern of voiding the vehicle manufacturer’s warranty because of
tampering with the Towed Vehicle's wiring.
Note: Installation requires drilling a hole in each taillight
housing in order to install the bulb and socket. Towed vehicle’s
taillights must have room for extra socket and bulb at the rear of
housing. Connects to 4 pin flat on Motorhome.
|
| |
|
| ULTRASONIC BACKUP SENSOR $129.99 |
Features
Wireless digital display
2 ultrasonic rear sensors
Audio/visual display
 |
Back-Up light trucks, SUVs, vans, and RVs Safely and With Confidence
Display shows distance to nearest object behind vehicle in either feet
or meters.
Alarm sound increases in intensity as distance to object decreases
(sound can be turned on or off).
Detects from 1 to 6.6 feet (0.4 to 2.0 meters).
Easy wireless installation from back to front.
Easy Installation:
Display connects to ignition and ground.
Sensors connect to control module in trunk
which connects to reverse light wire and ground. |
 MAGNETIC TOW LIGHT KIT
2 Lights (4" diameter) with 20' lead wire and 4 Pole
flat connector for vertical or horizontal mounting.
The kit comes with
NON-SCRATCH
magnetic bases and swivels to any angle needed.
Order with or without case and with 4 pin or 7 Pin RV Connector.
VIEW PRICES AND OPTIONS
LIGHT KIT WITH CASE - above
LIGHT KIT WITHOUT CASE - below
|
